Can You Upgrade the SSD in the KAIGERR AX18PRO?
The listing specifies a 512GB M.2 NVMe SSD. M.2 drives are screwed into a socket, so a larger NVMe drive can replace it. KAIGERR does not state whether a second M.2 slot exists.
| Item | AX18PRO value | Source |
|---|---|---|
| Installed drive | 512GB M.2 NVMe SSD | Amazon listing |
| PCIe generation | PCIe 3.0 | AMD (Ryzen 5 7430U) |
| Drive length | Read the label on the factory drive (2280 is the common size) | Check in person |
| Second M.2 slot | Not stated | Check with the cover off |
PCIe 3.0 vs PCIe 4.0 SSDs in the AX18PRO
PCIe 4.0 NVMe drives are backward compatible with PCIe 3.0 slots. In the AX18PRO they run at PCIe 3.0 speed, so a top-end PCIe 4.0 drive gives no speed advantage over a good PCIe 3.0 drive here. Buy on capacity, warranty and price instead.
- Single-sided drives (chips on one side) are the safe choice in thin laptops, where clearance under the drive is limited.
- NVMe, not M.2 SATA: the listing specifies NVMe. Do not assume M.2 SATA support.
- If you already own a PCIe 4.0 drive such as the Samsung 990 PRO, it will work, capped at PCIe 3.0 speed.
Clone the Drive or Reinstall Windows 11
| Method | What you need | Best for |
|---|---|---|
| Clone | An M.2 NVMe USB enclosure and cloning software | Keeping apps and settings as they are |
| Clean install | A USB drive with Windows 11 installation media | A fresh system without the factory image |
Before you start, create a Windows recovery drive (Microsoft recommends a USB drive of at least 16GB). After a clean install on the same laptop, Windows 11 normally activates on its own from the digital license tied to the hardware.
How to Install the New SSD
- Back up your files and create the recovery drive.
- Shut down fully (Shift + Shut down) and unplug the charger.
- Remove the bottom-cover screws, noting their positions, and release the cover with a plastic pry tool.
- Disconnect the battery connector if it is reachable.
- Remove the single screw at the end of the SSD; the drive tilts up. Pull it out at that angle.
- Insert the new drive at the same angle, press it flat and refit the screw. Do not overtighten.
- Reconnect the battery, refit the cover, then clone back or boot from the installation USB.
Tools: the iFixit Minnow driver kit covers the small Phillips screws.
Frequently Asked Questions
Can I install a PCIe 4.0 SSD in the KAIGERR AX18PRO?
Yes. PCIe 4.0 NVMe drives work in PCIe 3.0 slots, at PCIe 3.0 speed.
Does the KAIGERR AX18PRO have a second M.2 slot?
The Amazon listing does not mention one. Plan on replacing the 512GB drive, and check the motherboard once the bottom cover is off.
Will I lose my Windows license if I replace the SSD?
Windows 11 activates through a digital license linked to the hardware, so a clean install on the same laptop normally reactivates on its own.
What size SSD should I buy for the AX18PRO?
1TB is the usual step up from 512GB for games and media. Check the length printed on the factory drive label (for example 2280) and buy the same length.
Documented Primary Sources
This guide is based on the following documentation:
- AMD Ryzen 5 7430U Official Processor Specifications (Checked: 2026-11-12)
- KAIGERR AX18PRO Amazon.com listing (ASIN B0HK7LGLGW) (Checked: 2026-11-12)
- Microsoft Support: Create a recovery drive (Checked: 2026-11-12)