AFFILIATE DISCLOSURESpecForgePC is reader-supported. As an Amazon Associate, we earn from qualifying purchases. Learn more →
RAM & SSD UpgradesUpdated 2026-11-12 · 6 min read

KAIGERR AX18PRO RAM Upgrade: Slots, Maximum Memory and Compatible Kits

The KAIGERR AX18PRO ships with replaceable DDR4 SO-DIMM memory. This guide shows how to check the slot count in Windows, what the Ryzen 5 7430U supports, and which kit to buy.

SF
SpecForgePC Documentation TeamManufacturer-Documented Hardware Analysis

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

Yes. The KAIGERR AX18PRO ships with 16GB of DDR4 on a removable SO-DIMM module, not soldered memory. AMD rates its Ryzen 5 7430U for up to 64GB of dual-channel DDR4-3200. KAIGERR does not publish the slot count for this model, so check it in Task Manager (Performance, Memory, Slots used) before you order a kit.

Key Hardware Takeaways

  • Memory type: DDR4 SO-DIMM, listed by KAIGERR as removable (not soldered).
  • Processor limit: 64GB across two memory channels at up to DDR4-3200 (AMD).
  • Slot count: not published for the AX18PRO; Windows Task Manager shows it in a few seconds.
  • Most useful upgrade: a matched 2 x 16GB DDR4-3200 kit when the laptop has two slots.

Can You Upgrade the RAM in the KAIGERR AX18PRO?

Upgrade verdict: replaceable DDR4 SO-DIMM

The Amazon listing describes the installed 16GB as SODIMM DDR4 RAM. SO-DIMM modules plug into a socket, so you can replace them with larger modules. What KAIGERR does not state is how many sockets the AX18PRO has, which decides the upgrade path.

The KAIGERR AX18PRO uses the AMD Ryzen 5 7430U. Its memory controller supports DDR4-3200 and LPDDR4X-4267, two channels, and a maximum of 64GB, according to AMD.

ItemAX18PRO valueSource
Installed memory16GB DDR4 SO-DIMMAmazon listing
Maximum supported by the CPU64GBAMD
Memory channels2AMD
Fastest DDR4 speedDDR4-3200AMD
Number of SO-DIMM slotsNot publishedCheck in Windows (next section)

Check How Many RAM Slots Your AX18PRO Has

Windows reports the slot count without opening the laptop:

  1. Press Ctrl + Shift + Esc to open Task Manager.
  2. Open the Performance tab and select Memory.
  3. Read Slots used (for example "1 of 2") and Speed (for example "3200 MT/s") under the graph.
Task Manager showsWhat it meansUpgrade path
1 of 2One 16GB module, one empty slotAdd a matching 16GB DDR4-3200 module (32GB total), or replace with 2 x 32GB (64GB)
2 of 2Two 8GB modulesReplace both with a 2 x 16GB or 2 x 32GB kit
1 of 1A single slotReplace the module with one 32GB DDR4 SO-DIMM; the system stays single-channel

Two modules matter for more than capacity. Integrated Radeon graphics use system memory, and two matched modules run in dual-channel mode, which doubles the memory bus width available to the CPU and graphics compared with one module.

Which RAM Kit Fits the KAIGERR AX18PRO

  • Type: DDR4 SO-DIMM (laptop size). Desktop DIMMs and DDR5 modules do not fit.
  • Speed: DDR4-3200. Slower DDR4 modules work at their own speed; faster ones run at 3200.
  • Voltage: standard 1.2V JEDEC modules. You do not need XMP profiles.
  • 32GB with two slots: a matched 2 x 16GB kit such as the Crucial 32GB DDR4-3200 SO-DIMM kit (CT2K16G4SFRA32A).
  • 64GB: 2 x 32GB DDR4-3200 SO-DIMM, only if Task Manager shows two slots.

Buy a matched kit rather than mixing a new module with the factory one when you can. Mixed modules often work, but matched pairs avoid speed and timing mismatches.

How to Install New RAM in the AX18PRO

KAIGERR has not published a service manual for the AX18PRO, so these are the general steps for a laptop with a screwed bottom cover. Stop if a step does not match what you see.

  1. Test the laptop for a few days first, inside the Amazon return window. Back up your files.
  2. Shut down fully: hold Shift while you click Shut down, then unplug the charger.
  3. Place the laptop face down on a soft cloth and remove the bottom-cover screws. Note which screw came from which hole, since lengths can differ.
  4. Release the cover with a plastic pry tool, starting at a corner. Do not use a metal screwdriver in the seam.
  5. If the battery connector is reachable, disconnect it before touching the memory.
  6. Spread the two metal clips beside the module; it tilts up. Pull it out at that angle.
  7. Insert the new module at the same angle, notch aligned, then press it down until the clips lock.
  8. Reconnect the battery, refit the cover and screws, then plug in the charger and power on.
  9. The first boot can take longer than usual while the firmware trains the new memory. Do not force it off. Then confirm the new total and speed in Task Manager.

Tools: a precision Phillips set such as the iFixit Minnow driver kit and plastic pry tools such as the iFixit opening tool assortment.

Frequently Asked Questions

Is the RAM soldered on the KAIGERR AX18PRO?

No. The Amazon listing describes the installed 16GB as SODIMM DDR4, which is a removable module.

What is the maximum RAM for the KAIGERR AX18PRO?

The Ryzen 5 7430U supports up to 64GB (AMD). Reaching 64GB requires two SO-DIMM slots with a 32GB module in each. KAIGERR does not publish the slot count, so check Slots used in Task Manager.

Can I install DDR5 in the KAIGERR AX18PRO?

No. The Ryzen 5 7430U supports DDR4 and LPDDR4X only, and DDR5 SO-DIMMs are keyed differently.

Does more RAM make the AX18PRO faster in games?

Running two matched modules (dual channel) helps integrated graphics the most. Going from 16GB to 32GB helps when a game plus background apps use more than 16GB; Task Manager shows memory in use.

Documented Primary Sources

This guide is based on the following documentation: