Hub vs Dock: What Changes on Your Desk
A USB-C hub plugs into one laptop port and draws its power from the laptop or from a charger you plug into it. The four hubs below each have a USB-C Power Delivery (PD) input: plug your laptop charger into it and the hub passes most of that power to the laptop. None of them include a charger.
A dock such as the CalDigit TS4 has its own power supply (230W, included), charges the laptop at up to 98W and connects over Thunderbolt 4 or USB4 at 40Gbps. That bandwidth is what lets it drive two 4K 60Hz screens on supported hosts, plus 2.5GbE Ethernet and 18 ports in total. The Thunderbolt and USB4 side is covered in our Thunderbolt 4 vs USB4 guide.
| Model | Video out | Best image | Laptop charging | Data and extras | Power source |
|---|---|---|---|---|---|
| Anker 332 (A8355) | 1x HDMI 1.4 | 4K 30Hz | Up to 85W | 1x USB-C, 2x USB-A (5Gbps) | Your USB-C charger |
| Anker 7-in-1 (A83D2) | 1x HDMI 2.0 | 4K 60Hz | 85W max | 1x USB-C, 2x USB-A (5Gbps), SD, TF | Your USB-C charger |
| Anker 553 (8-in-1) | 2x HDMI | One at 4K 60Hz, or two at 4K 30Hz | Up to 85W | 1x USB-C, 2x USB-A (5Gbps), 1Gbps Ethernet, SD, microSD | Your USB-C charger |
| UGREEN Revodok 105 | 1x HDMI 1.4 | 4K 30Hz | Up to 95W | 1x USB-A 5Gbps, 2x USB-A 480Mbps | Your USB-C charger |
| CalDigit TS4 (dock) | 1x DisplayPort 1.4, 2x Thunderbolt 4 | 8K 60Hz, or dual 4K 60Hz on supported hosts | Up to 98W | 18 ports, 2.5GbE, UHS-II SD and microSD | Included 230W power supply |
Specs come from Anker, UGREEN and CalDigit pages and the Amazon listings named in the sources at the end of this guide.
One Monitor: 4K 30Hz or 4K 60Hz
The cheapest hubs often list "4K HDMI" in the title without the refresh rate. Read the port line in the specs:
- 4K at 30Hz (Anker 332, UGREEN Revodok 105, both HDMI 1.4): the screen refreshes 30 times per second, half as often as a standard 60Hz desktop. It works for slides, documents and video playback.
- 4K at 60Hz (Anker 7-in-1 A83D2, HDMI 2.0): the full refresh rate of a standard 4K office monitor. If you are connecting a 4K monitor such as the ones in our 4K monitor guide, this is the one to get.
On a 1080p or 1440p monitor, the 30Hz limit applies only at 4K, so check the monitor's resolution before paying for the 60Hz model.
Two Monitors from One Hub: Windows Extends, Mac Mirrors
The Anker 553 has two HDMI ports. With one screen connected it reaches 4K 60Hz; with two, each screen runs at up to 4K 30Hz.
What you see on those two screens depends on the operating system. Anker's FAQ for the 553 states that Windows supports both SST and MST (Multi-Stream Transport) mode, while macOS and iPadOS only support SST. MST is how one USB-C video signal is split into two separate desktops. The result, in Anker's words for Mac laptops: monitors connected via HDMI mirror and show the same image.
- Windows laptop with a video-capable USB-C port: the 553 can give you two extended desktops.
- MacBook: the 553 gives you two copies of one external desktop. For two different desktops, skip dual HDMI hubs and read the next section.
Macs: Count the Supported Displays First
Before buying anything for two monitors, check how many external displays your Mac supports in Apple's tech specs. Two examples from Apple:
- MacBook Air (M2, 2022): one external display, up to 6K at 60Hz. No hub or dock changes that count.
- MacBook Air (13-inch, M5): up to two external displays, and Apple states it supports up to two external displays over a single Thunderbolt port.
On a Mac that supports two displays, the single-cable route is a Thunderbolt dock with separate video outputs, such as the CalDigit TS4 (one DisplayPort 1.4 and two downstream Thunderbolt 4 ports). A dual HDMI hub that relies on MST still mirrors. For desktop Macs, see our Mac mini M4 monitors and docks guide.
Laptop Charging: How Much Power Gets Through
Pass-through charging means your charger feeds the hub, and the hub keeps a share for its own ports before passing the rest to the laptop:
- UGREEN Revodok 105: 100W PD port, up to 95W to the laptop; UGREEN reserves 5W for the hub.
- Anker 332, 7-in-1 and 553: up to 85W to the laptop. For the 553, Anker specifies a charger and a USB-C to C cable that both support 100W PD to reach 85W.
The PD input is for power only. On the Anker 332, Amazon's listing notes that the 100W PD-IN port does not support data devices, so plan your accessories around the other ports.
A charger with a single 100W USB-C port fits these hubs. The Anker Prime 100W (A2343) delivers up to 100W from one USB-C port, but its split drops to 65W when you also charge a phone from the second USB-C port, so keep the hub on that port alone if your laptop needs the full power.
Check Your Laptop Port Before You Buy
A hub cannot create a video signal. UGREEN states that the host's USB-C port must support video output, and Anker's 553 listing says the connected device must support DP Alt Mode. Some budget laptops have a data-only USB-C port.
- Look for DisplayPort Alt Mode, Thunderbolt or USB4 next to the USB-C port in your laptop's spec sheet.
- Use the hub's HDMI port for the screen. On the Anker 332 and 7-in-1, the USB-C ports on the hub carry data only.
- For drives, use the 5Gbps ports: two of the three USB-A ports on the UGREEN Revodok 105 run at 480Mbps.
Which One to Buy
- One 4K monitor, any laptop with USB-C video: Anker 7-in-1 (A83D2), for 4K 60Hz.
- One 1080p or 1440p monitor, laptop near 100W: UGREEN Revodok 105, for 95W of pass-through power.
- Smallest setup, one screen: Anker 332.
- Two monitors on Windows, plus Ethernet: Anker 553, at 4K 30Hz per screen.
- Two separate monitors on a Mac, or two at 4K 60Hz: a Thunderbolt dock such as the CalDigit TS4, on a host that supports two displays.
Frequently Asked Questions
Can a USB-C hub run two monitors on a MacBook?
A dual HDMI hub such as the Anker 553 shows the same image on both screens on a Mac. Anker states that macOS only supports SST mode, so the two HDMI outputs mirror. For two separate desktops, the Mac itself must support two external displays (the MacBook Air M5 does, the MacBook Air M2 supports one), connected through a Thunderbolt dock or two separate ports.
Why does my 4K monitor run at 30Hz through a USB-C hub?
Many compact hubs use an HDMI 1.4 port limited to 4K at 30Hz, such as the Anker 332 and the UGREEN Revodok 105. A hub with HDMI 2.0, such as the Anker 7-in-1 (A83D2), reaches 4K at 60Hz. On a dual HDMI hub like the Anker 553, connecting a second screen also drops both to 4K 30Hz.
Will a 100W charger charge my laptop at 100W through a hub?
No. The hub keeps part of the power for its own ports. The UGREEN Revodok 105 passes up to 95W, and the Anker 332, 7-in-1 and 553 pass up to 85W. A Thunderbolt dock with its own power supply, such as the CalDigit TS4, charges at up to 98W.
Why does nothing appear on my monitor when I plug in the hub?
The most common reason is a laptop USB-C port without video output. UGREEN and Anker both state that the host port must support video (DP Alt Mode). Check your laptop spec sheet for DisplayPort Alt Mode, Thunderbolt or USB4, and connect the monitor to the hub HDMI port, not to a hub USB-C data port.
Documented Primary Sources
This guide is based on the following documentation:
- Anker 332 USB-C Hub (A8355) product page (Checked: 2026-11-14)
- Amazon.com listing Anker 7-in-1 USB-C Hub (A83D2) (Checked: 2026-11-14)
- Anker 553 USB-C Hub (A8380) product page and FAQ (Checked: 2026-11-14)
- UGREEN Revodok 105 (15495) product page (Checked: 2026-11-14)
- Apple MacBook Air (13-inch, M5) tech specs (Checked: 2026-11-14)
- Apple MacBook Air (M2, 2022) tech specs (Checked: 2026-11-14)